Note: before we get started, please make sure the gateway or router is equipped with Wi-Fi module and the Wi-Fi antennas are in place. If not, the WLAN-related configuration will fail to be carried out.
There are distinguishing frequency in a different model.
|UR5X||2.4GHz or 5GHz|
|UR7X(V1)||2.4GHz or 5GHz|
|UR7X(V2)||2.4GHz and 5GHz|
|UG8X||2.4GHz or 5GHz|
Step 1: Log in to your Web GUI account. Go to "Network"> "Interface" > "WLAN" for configuration.
Step 2: The "Work Mode" is set as "AP" by default. Change it to "Client" Mode.
Step 3: Click "Scan" to search and join the Wi-Fi Network nearby.
Step 4: Type in your "SSID" and "BSSID". Select Encryption Mode and Cipher from the list. Enter your password and click "save" to make changes take effect.
You can follow the steps below to verify if the device has successfully connected to Wi-Fi network.
Method 1. Go to "Status" > "WLAN" and check the connection status. If the IP address is obtained properly, then the device has successfully joined the Wi-Fi network.
Method 2.Go to "Maintenance" > "Tools" > "Ping" and enter a web URL. Click "Ping" to see if you are able to visit Internet.